齒輪傳動設計畢業論文

1、 畢業設計（論文） 畢業設計（論文）題目： 齒輪傳動設計 姓名： 學號： 二級院系部： 機電工程系 班級: 機電 092 專業： 機電一體化

2、二〇 一二 年 六 月IIAbstractGEAR is the machine, the instrument use most of the transmission parts,especially the application of involute gear more widely. Gear is a more complicated geometry, to a single gear tooth

3、profile processing error national standard for 17 kinds of control parameters, according to the requirements of the use of different gear, these 17 parameter control requirements are different. How to determine the

4、 accuracy of gear on the basis of the precision grade level and ensure that the relevant control parameters of the tolerance values, is the key to gear design. The traditional design method is based on e

5、xperience with analogy method, combining look-up table and a large number of multifarious formula calculation, this method is a big workload, 2 it is not possible to optimize the parameters and screening, it

6、was difficult to ensure that the rationality of the design of the accuracy. Therefore, the assistant software to borrow gear geometry parameters are calculated, on the accuracy of the design and its related data computer