計算機外文翻譯 -----大容量存儲器

1、<p>　　附件1：外文資料翻譯譯文 </p><p><b>　　大容量存儲器</b></p><p>　　由于計算機主存儲器的易失性和容量的限制, 大多數的計算機都有附加的稱為大容量存儲系統的存儲設備, 包括有磁盤、 CD 和 磁帶。相對于主存儲器，大的容量儲存系統的優點是易失性小，容量大，低成本, 并且在許多情況下, 為了歸檔的需要可以把儲存介質從計算

2、機上移開。</p><p>　　術語聯機和脫機通常分別用于描述連接于和沒有連接于計算機的設備。聯機意味著，設備或信息已經與計算機連接，計算機不需要人的干預，脫機意味著設備或信息與機器相連前需要人的干預，或許需要將這個設備接通電源，或許包含有該信息的介質需要插到某機械裝置里。</p><p>　　大量儲存器系統的主要缺點是他們典型地需要機械的運動因此需要較多的時間，因為主存儲器的所有工作都由

3、電子器件實現 。 </p><p><b>　　1. 磁盤</b></p><p>　　今天，我們使用得最多的一種大量存儲器是磁盤，在那里有薄的可以旋轉的盤片，盤片上有磁介質以儲存數據。盤片的上面和（或）下面安裝有讀/寫磁頭，當盤片旋轉時，每個磁頭都遍歷一圈，它被叫作磁道，圍繞著磁盤的上下兩個表面。通過重新定位的讀/寫磁頭，不同的同心圓磁道可以被訪問。通常，一個磁

4、盤存儲系統由若干個安裝在同一根軸上的盤片組成，盤片之間有足夠的距離，使得磁頭可以在盤片之間滑動。在一個磁盤中，所有的磁頭是一起移動的。因此，當磁頭移動到新的位置時，新的一組磁道可以存取了。每一組磁道稱為一個柱面。</p><p>　　因為一個磁道能包含的信息可能比我們一次操作所需要得多，所以每個磁道劃分成若干個弧區，稱為扇區，記錄在每個扇區上的信息是連續的二進制位串。傳統的磁盤上每個磁道分為同樣數目的扇區，而每個

5、扇區也包含同樣數目的二進制位。（所以，盤片中心的儲存的二進制位的密度要比靠近盤片邊緣的大）。</p><p>　　因此，一個磁盤存儲器系統有許多個別的磁區, 每個扇區都可以作為獨立的二進制位串存取，盤片表面上的磁道數目和每個磁道上的扇區數目對于不同的磁盤系統可能都不相同。磁區大小一般是不超過幾個KB; 512 個字節或 1024 個字節。</p><p>　　磁道和扇區的位置不是磁盤的物理

6、結構的固定部分，它是通過稱為磁盤格式化或初始化形成的，它通常是由磁盤的廠家完成的，這樣的盤稱為格式化盤，大多數的計算機系統也能執行這一個任務。因此, 如果一個磁盤上的信息被損壞了磁盤能被再格式化，雖然這一過程會破壞所有的先前在磁盤上被記錄的信息。</p><p>　　磁盤儲存器系統的容量取決于所使用盤片的數目和所劃分的磁道與扇區的密度。低容量的系統僅有一張塑料盤片組成,稱為軟磁盤或軟盤，另一個名稱是floppy

7、disk，強調它的靈活性。 (現在直徑3.5英寸的軟盤封裝在硬的塑料盒子里，沒有繼續使用老的為5.25英寸的軟盤的柔軟紙質包裝）軟盤很容易插入到相應的讀寫裝置里，也容易讀取和保存，因此，軟盤通常用于信息的脫機存儲設備，普通的3.5英寸軟盤的容量是1.44MB，而特殊的軟盤會有較高的容量，一個例子是INMEGA公司的ZIP盤，單盤容量達幾百兆。</p><p>　　大容量的磁盤系統的容量可達幾個GB，它可能有5-1

8、0個剛性的盤片，這種磁盤系統出于所用的盤片是剛性的，所以稱為硬盤系統，為了使盤片可以比較快的旋轉，硬盤系統里的磁頭不與盤片是表面接觸，而是依靠氣流“浮”在上面，磁頭與盤片表面的間隙非常小，甚至一顆塵粒都會造成磁頭和盤片卡住，或者兩者毀壞（這個現象稱為劃道）。因此，硬盤系統出廠前已被密封在盒子里。</p><p>　　評估一個磁盤系統的性能有幾個指標： </p><p>　?。?）尋道時間，

9、讀/寫磁頭從當前磁道移到目的磁道（依靠存取臂）所需要的時間 。</p><p>　?。?）旋轉延遲或等待時間，讀/寫磁頭到達所要求的磁道后，等待盤片旋轉使讀/寫磁頭位于所要存取的數據（扇區）上所需要的時間。它平均為盤片旋轉一圈時間的一半。</p><p>　?。?）存取時間，尋道時間和等待時間之和。</p><p>　　（4）傳輸速率，數據從磁盤上讀出或?qū)懭氪疟P的時

10、間。</p><p>　　硬盤系統的性能通常大大優于軟盤，因為硬盤系統里的讀/寫磁頭不接觸盤片表面，所以盤片旋轉速度達到每分種幾千轉，而軟盤系統只有每分300轉。因此，硬盤系統的傳輸速率通常以每秒MB數目來標稱，比軟盤系統大得多，因為后者僅為每秒數KB。</p><p>　　因為磁盤系統需要物理移動來完成它的們的操作，因此軟盤系統和硬盤系統都難以與電子工業線路的速度相比。電子線路的延遲時間

11、是以毫微秒或更小單位度量的，而磁盤系統的尋道時間，等待時間和存取時間是以毫秒度量的，因此，從磁盤系統檢索信息所需要的時間與電子線路的等待時間相比是一個漫長的過程。</p><p><b>　　2. 光盤</b></p><p>　　另一種流行的數據存儲技術是光盤，盤片直徑是12厘米（大約5英寸），由反射材料組成，上面有光潔的保護層。通過在它們反射層上創建反射偏差的方

12、法在上面記錄信息，這種信息可以借助激光束檢測出來，因為在CD旋轉時激光束監視它的反射面上的反射偏差。</p><p>　　CD技術原來用于音頻錄制，采用稱為CD-DA（光盤數字音頻）的記錄格式，今天作為計算機數據存儲器使用的CD實際上使用同樣的格式。CD上的信息是存放在一條繞著CD的螺旋形的磁道上，很象老式唱片里的凹槽；與老式唱片不同的是，CD上的磁道是從里向外的，這條磁道被分成稱為扇區的單元。每個扇區有自己的標

13、識，有2KB的數據容量，相當于在音頻錄制時1/75的音樂。</p><p>　　CD上保存的信息在整個螺旋形的磁道是按照統一的線性刻度，這就意味著，螺旋形磁道靠邊的環道存放的信息比靠里邊的環道要多。所以，如果盤片旋轉一整圈，那么激光束在掃描螺旋形磁道外邊時讀到的扇區個數要比里邊多。因而，為了獲得一致的數據傳輸速率，CD-DA播放器能夠根據激光束在盤片上的位置調整盤片的旋轉速度。但是，作為計算機數據存儲器使用的大多

14、數CD驅動器都以一種比較快的、恒定的速度旋轉盤片，因此必須適應數據傳輸速率的變化。</p><p>　　這種設計思想就使得CD存儲系統在對付長而連續的數據串時有最好的表現，如音樂復制。相反，當一個應用需要以隨機的方法存取數據時，那么磁盤存儲器所用的方法（獨立的、同心的磁道）就勝過CD所用的螺旋形方法。</p><p>　　傳統CD的容量為600~700MB。但是，較新的DVD的容量達到幾個

15、GB。DVD由多個半透明的層構成，精確聚焦的激光可以識別不同的層。這種盤能夠儲存冗長的多媒體演示，包括整個電影。 </p><p><b>　　3． 磁帶 </b></p><p>　　一種比較老式的大容量存儲器設備是磁帶。這時，信息儲存在一條細薄的的塑料帶的磁介質涂層上，而塑料帶則圍在磁帶盤上作為存儲器，要存取數據時，磁帶裝到稱為磁帶驅動器的設備里，它在計算機控制下

16、通常可以讀帶，寫帶和倒帶，磁帶機有大有小，從小的盒式磁帶機到比較老式的大型盤式磁帶機，前者稱為流式磁帶機，它表面上類似于立體聲收錄機，雖然這些磁帶機的存儲容量依賴于所使用的格式，但是大多數都達幾個GB。</p><p>　　現代的流式磁帶機都將磁帶劃分為許多段，每段的標記是格式化過程中磁化形成的，類似于磁盤驅動器。每一段含有若干條縱向相互平行的磁道，這些磁道可以獨立地存取，因而可以說，磁帶是由許多單獨的二進制位串

17、組成的，好比磁盤的扇區。</p><p>　　磁帶技術的主要缺點是：在一條磁帶上不同位置之間移動非常耗費時間，因為在磁帶卷軸之間要移動很長的磁帶，于是，磁帶系統的數據存取時間比磁盤系統的長，因為對于不同的扇區，磁盤的讀/寫磁頭只要在磁道之間作短的移動，因此，磁帶不是流行的聯機的數據存儲設備，但是，磁帶系統常使用在脫機檔案數據應用中，原因是它具有容量大，可靠性高和性價比好等優勢。雖然例如DVD非傳統技術的進展正迅速

18、向這磁帶的最后痕跡提出挑戰。</p><p>　　4. 文件存儲和檢索</p><p>　　在大容量存儲系統中，信息是以稱為文件的大的單位儲存的，一個典型的文件可以是一個全文本的資料，一張照片，一個程序或一組關于公司員工的數據，大容量存儲系統的物理特性表明，這些文件是按照許多字節為單位存儲的檢索的，例如，磁盤上每個扇區必須作為一個連續的二進制位串進行操作，符合存儲系統物理特性的數據塊稱為

19、物理記錄，因此存放在大容量存儲系統中的文件通常包含許多物理記錄。</p><p>　　與這種物理記錄劃分相對的是，一個文件通常有一種由它所表示的信息決定的自然劃分，例如，一個關于公司員工信息的文件由許多單元組成，每個單元由一個員工的信息組成。這些自然產生的數據塊稱為邏輯記錄，其次，邏輯記錄通常由更小的稱為字段的單元組成，例如，包含員工信息的記錄大概由姓名，地址，員工標識號等字段組成。</p><

20、;p>　　邏輯記錄的大小很少能夠與大容量存儲系統的物理記錄相匹配，因此，可能許多個邏輯記錄可以存放在一個物理記錄中，也可能一個邏輯記錄分成幾個物理記錄，因此，從大容量存儲系統中存取數據時需要一定的整理工作，對于這個問題的常用解決方法是，在主存儲系統里設置一個足夠大的存儲區域，它可以存放若干個物理記錄并可以通過它重新組織數據。（以符合邏輯記錄（讀）或物理記錄（寫）的要求）也就是說，在主存儲器與大容量存儲系統之間傳輸?shù)臄?shù)據應該符合物理

21、記錄的要求。同時位于主存儲器區域的數據按照邏輯記錄可以被查閱。</p><p>　　主存儲器中的這種存儲區域稱為緩沖區，通常，緩沖區是在一個設備向另一個設備傳輸數據時用來臨時保存數據的，例如，現代的打印機都有自己的存儲芯片，其大部分的作為緩沖區，以保存該打印機已經收到但還沒有打印的那部分?jǐn)?shù)據。</p><p>　　由此可知，主存儲器，磁盤，光盤和磁帶依次表示隨機存取程度降低的設備，主存儲器

22、里所用的編址系統可允許快速隨機地存取某個字節。磁盤只能隨機存取整個扇區的數據。其次，檢索一個扇區涉及尋道時間和旋轉延遲，光盤也能夠隨機存取單個扇區，但是延遲時間比磁盤長一些，因為把讀/寫頭定位到螺旋形磁道上并調準盤片的旋轉速度需要的時間較長，最后，磁帶幾乎沒有隨機存取的機制，現代的磁帶系統都在磁帶上做標記，使得可以單獨存取磁帶上指定的段，但是磁帶的物理結構決定了存取遠距離的段需要花費比較多的時間。 </p><p&g

23、t;　　附件2：外文原文（復印件） </p><p>　　Mass Storage </p><p>　　Due to the volatility and limited size

24、 of a computer’s main memory, most computers have additional memory devices called mass storage systems, which include magnetic disks,CDs,and magnetic tapes. The advantages of mass storage systems over main memory includ

25、e less volatility, large storage capacities, low cost, and in many cases, the ability to remove the storage medium from the machine for archival purposes.</p><p>　　The terms on-line and 0ff-line are often us

26、ed to describe devices that can be either attached to or detached from a machine. On-line means that the device or information is connected and readily available to the machine without human intervention. Off-line means

27、that human intervention is required before the device or information can be accessed by the machine-perhaps because the device must be turned on, or the medium holding the information must be inserted into some mechani

28、sm.</p><p>　　A major disadvantage of mass storage systems is that they typically require mechanical motion and therefore require significantly more time to store and retrieve data than a machine’s main memor

29、y, where all activities are performed electronically.</p><p>　　Magnetic Disks</p><p>　　One of the most common forms of mass storage in use today is the magnetic disk, in which a thin spinning di

30、sk with magnetic coating is used to hold data. Read/write heads are placed above and/or below the disk so that as the disk spins, each head traverses a circle, called a track, around the disk’s upper or lower surface. By

31、 repositioning the read/write heads, different concentric tracks can be accessed. In many cases, a disk storage system consists of several disk mounted on a common spindle, </p><p>　　Since a track can contai

32、n more information than we would normally want to manipulate at any on time, each track is divided into arcs called sectors on which information is recorded as track is divided into arcs called sectors on which informati

33、on is record as a continuous string of bits. Each track on a traditional disk contains the same number of sectors, and each sector contains the same number the center of bits. (Thus the bits within a sector are more comp

34、actly stored on the track nearer the</p><p>　　Thus, a disk storage system consists of many individual sectors, each of which can be sectors per track vary grealy from one disk system to another. Sector sizes

35、 tend to be no more than a few KB; sectors of 512 bytes or 1024 bytes are common.</p><p>　　The location of tracks and sectors is not a permanent part of a disk’s physical structure. Instead, they are marked

36、magnetically through a process called formatting (or initializing ) the disk. This process is usually performed by the disk’s manufacturer , resulting in what are known as formatted disks. Most computer systems can also

37、perform this task. Thus, if the format information on a disk is damaged, the disk can be reformatted, although this process destroys all the information that was pr</p><p>　　The capacity of a disk storage sy

38、stem depend on the number of number of disks used and the density in which the tracks and sectors are placed. Lower-capacity systems consist of a single plastic disk known as a diskette or, in those cases in which the di

39、sk is flexible, by the less prestigious title of floppy disk. (today’s 3 1／2-inch diameter floppy disks are housed in rigid plastic cases, which do not constitute as flexible a package as their older 5 1／4-inch diameter

40、cousins that were housed in</p><p>　　High-capacity disk systems, capable of holding many gigabytes, consist of perhaps five to ten rigid disks mounted on a common spindle. The fact that the disks used in the

41、se systems are rigid leads them to be known as hard-disk systems, in contrast to their floppy counterparts. To allow for faster rotation speeds, the read/write heads in these systems do not touch the disk but instead “fl

42、oat”just off the surface. The spacing is so close that even a single particle of dust could become jammed betw</p><p>　　Several measurements are used to evaluate a disk system’s performance:(1)seek tome (the

43、 time required to move the read/write heads from one rack to another);(2)rotation delay or latency time (half the time required for the disk to make a complete rotation, which is the average amount of time required for t

44、he desired data to rotate around to the read/write head once the head has been positioned over the desired track); (3)access time (the sum of seek time and rotation delay);and (4)transfer rate </p><p>　　Hard

45、-disk systems generally have significantly better characteristics than floppy systems. Since the read/write heads do not touch the disk surface in a hared-disk system, one finds rotation speeds of several thousand revolu

46、tions per minute, whereas disks in floppy-disk systems rotate on the order of 300 revolutions per minute. Consequently, transfer rates for hard-disk systems, usually measured in megabytes per second, are much greater tha

47、n those associated with floppy-disk systems, which tend </p><p>　　Since disk systems require physical motion for their operation, both hard and floppy systems suffer when compared to speeds within electronic

48、 circuitry. Delay times within an electronic circuit are measured in units of nanoseconds (billionths of a second) or less, whereas seek times, latency times, and access times, and access times of disk systems are measur

49、ed in milliseconds (thousandths of a second). Thus the time required to retrieve information from a disk system can seem like an eternity t</p><p>　　Compact Disks</p><p>　　Another popular data s

50、torage technology is the compact disk (CD). There disks are 12 centimeters ( approximately 5 inches ) in diameter and consist of reflective material covered with a clear protective coating. Information is recorded on the

51、m by creating variations in their reflective surfaces. This information can then be retrieved by means of a laser beam that monitors irregularities on the reflective surface of the CD as it spins.</p><p>　　C

52、D technology was originally applied to audio recording using a recording using a recording format known as CD-DA (compact disk-digital audio), and the CDs used today for computer data storage use essentially the same for

53、mat. In particular, information on these CDs is stored on a single track that spirals around the CD like a groove in an old-fashioned record; however, unlike old-fashioned records, the track on a CD spirals from the insi

54、de out .This track is divided into units called sectors, ea</p><p>　　Information is stored on a CD at a uniform linear density over the entire spiraled track, which means that more information is stored in a

55、 loop around the outer portion of the spiral than in a loop around the inner portion. In turn, more sectors will be read in a single revolution of the disk when the laser beam is scanning the outer portion of the spirale

56、d track than when the beam is scanning the inner portion. Thus, to obtain a uniform rate of data transfer, CD-DA players are designed to vary </p><p>　　As a consequence of such design decision, CD storage sy

57、stems perform best when dealing with long, continuous string of data, as when reproducing music. In contrast, when an application requires access to items of data in a random manner, the approach used in magnetic disk st

58、orage (individual, concentric tracks) outperforms the spiral approach used in CDs.</p><p>　　Traditional CDs have capacities in the range of 600 to 700MB. However. Newer DVD (Digital Versatile Disks),which ar

59、e constructed from multiple, semi-transparent layers that can be distinguished by a precisely focused laser, provide storage capacities on order of several GB. Such disks are capable of storing lengthy multimedia present

60、ations, including entire motion pictures.</p><p>　　Magnetic Tape</p><p>　　An older form of mass storage device uses magnetic tape. Here, information is recorded on the magnetic coating of a thin

61、 plastic tape that is wound on a reel for storage. To access the data, the tape is mounted in a device called a tape drive that typically can read, write, and rewind the rape under control of the computer. Tape drives ra

62、nge in size from small cartridge units, called streaming tape units, which units. Although the capacity of these devices depends on the format used, most can ho</p><p>　　Modern streaming tape systems divide

63、a tape into segments, each of which is magnetically marked by a formatting process similar to that of disk storage devices. Each of these segments contains several tracks that run parallel to one another lengthwise on th

64、e tape. There tracks can be accessed independently, meaning that the tape ultimately consists of numerous individual stings of bits in a manner similar to the sectors on a disk.</p><p>　　A major disadvantage

65、 of magnetic tape technology is that moving between different positions on a tape can be very time-consuming owing to the significant amount of tape that must be moved between the reels, Thus tape systems have much longe

66、r data access times than magnetic disk systems in which different sectors can be accessed by short movements of the read/write head. In turn, tape systems are not popular for on-line data storage Instead, magnetic tape t

67、echnology is used in off-line archival d</p><p>　　File Storage and Retrieval</p><p>　　Information is stored in mass storage systems in large units called files. A typical file may consist of a c

68、omplete text document, a photograph, a program, or a collection of data about the employees in a company. The physical properties of mass storage devices dictate that these files be stored and retrieved in multiple byte

69、units. For example, each sector on a magnetic disk must be manipulated as one continuous string of bits. A block of data conforming to the physical characteristics of a sto</p><p>　　In contrast to this divis

70、ion into physical records, a file often has natural divisions determined by the information represented. For example, a file containing information regarding a company’s employees would consist of multiple units , each c

71、onsisting of the information about one employee. These naturally occurring blocks of data are called logical records. Moreover, logical records often consist of smaller units called field. For example ,a logical record c

72、ontaining information about an empl</p><p>　　Logical record sizes rarely match the physical record size dictated by a mass storage device. In turn, one may final several logical records residing within a sin

73、ge physical record or perhaps a logical record split between two or more physical records. The result is that a certain amount of unscrambling is associated with retrieving data from mass storage systems. A common soluti

74、on to this problem is to set aside an area of main memory that is large enough to hold several physical records and to</p><p>　　An area of memory used in this manner is called a buffer. In general , a buffer

75、 is a storage area used to hold data on a temporary basis, usually during the process of being transferred from one device to another. For example, modern printers contain memory circuitry of their own, a large part of w

76、hich is used as a buffer for holding portions of a document that have been received by the printer but not yet printed.</p><p>　　Finally we should note that main memory, magnetic disks, compact disks, and ma

77、gnetic tape exhibit decreasing degrees of random access to data. The addressing system used in main memory allows rapid random access to individual bytes of data. Magnetic disks provide random access only to entire secto